• Eliminates need for lime
• Reduces water required for workability
• Improves weather resistance, reduces porosity
• Easier and faster to use
• Ensures mortar spreads further
• Improves frost resistance
• Remains plastic for longer
• More economical than traditional mortars.
• Easy site use.
• Handy pack size.
• Works very well in warm & hot climates.
• Substantially reduces surface cracking & crazing.
• Much longer “open” time for masons.

• Saves time and money
• No special storage or handling required
• Reduction in shrinkage and cracking
• Eliminates efflorescence, improves durability
• Increased output on site
• Saves money, improves yield
• Can be used down to -2ºC
• Labour efficiencies + less waste

• MIXDH is supplied in 3lb packs.
• 1 scoop of MixDH is sufficient for 50kg cement.

Note: Effects of over dosage: It is not recommended to exceed dosage as stated above, however, the selfcontrolling action of of MixDH limits the air-entrainment ability, thus safe-guarding against over-dosage.

• Concentrated product reduces transport
• Powder product eliminates transporting water
• Waste packaging reduced by up to 90%
• No large plastic containers sent to landll
• Reduced storage and handling – saves energy
• Cement savings = carbon savings
• Mix UK is a carbon Neutral company
• Saves water, reduces CO2

Open the pack, add 1 scoop of MIX DH to the gauging water in a storage tank or place into the mixing drum at the same time as the water. When mixing by hand, ensure thorough mixing to achieve maximum plasticity.

MixDH protects wet mortar from frost down to -2ºC.

Do not use at temperatures below -2ºC or when
temperature is expected to drop below -2ºC within
24 hours.

Follow relevant codes of practice for mortars.